---
title: "Add a Lead or Contact to a Gong Engage Flow from Distro"
source_url: https://help.chilipiper.com/hc/en-us/articles/48644348340883-Add-a-Lead-or-Contact-to-a-Gong-Engage-Flow-from-Distro
article_id: 48644348340883
updated_at: 2026-04-23T12:27:44Z
---

## Who can use this feature?

Available on All Products or Routing & Scheduling

Available to Admins or Workspace Managers

[Billing Center](https://fire.chilipiper.com/fire/admin/billing/overview) [Get a Demo](https://www.chilipiper.com/request-demo?utm_source=zendesk&utm_medium=help-center&utm_campaign=chili-hub)

This article explains how to add Leads or Contacts to a Gong Engage Flow directly from the **Distro Flow Builder**.

* * *

## Table of Contents

  * Gong integration in Chili Piper
  * Add Leads and Contacts to a Gong Engage Flow
  * Limitations



* * *

## Gong integration in Chili Piper

Before adding records to Gong Engage Flows, you’ll need to connect Gong in Chili Piper.

  1. In the **Command Center** , click **Integrations** in the left-hand menu.   
![01-admin-center-nav.png](https://help.chilipiper.com/hc/article_attachments/48644312974739)
  2. On the **Built-In Integrations** tab, scroll to **Sales Automation & Engagement** and click **Connect** next to **Gong**.   
  
![02-integrations-gong-connected.png](https://help.chilipiper.com/hc/article_attachments/48644348332563)



You’re ready when the integration shows a **Connected** status.

**⚠️ Important**  
If Gong was previously connected, you must **disconnect and reconnect** it to grant the additional scopes required for Gong Engage (read workspaces, read flows, assign to flow).

### Integration user requirements

The user who authenticates the Gong integration must have a **Gong Engage seat**.

That integration user can access:

  * **Company flows** – shared across the Gong organization
  * **Personal flows** – created by the integration user
  * **Shared flows** – shared with the integration user by others



* * *

## Add Leads and Contacts to a Gong Engage Flow

Once Gong is connected, you can add Leads or Contacts to a Gong Engage Flow from any Lead- or Contact-triggered Distro router.

  1. In the **Distro Flow Builder** , click the **+** icon to add a node, then select **Add to Flow** under **Integrations**.   
  
![03-flow-builder-node-picker.png](https://help.chilipiper.com/hc/article_attachments/48644348333331)
  2. Configure the node in the side panel:   
  
![04-add-to-flow-panel.png](https://help.chilipiper.com/hc/article_attachments/48644502279315)
     * **Select Gong Flow** – Choose the Gong Engage Flow
     * **Flow Assignee** – Select who will own the flow:
       * **Lead Owner / Contact Owner**
       * **Selected User from Workspace**



**⚠️ Assignment requirement**  
If you choose **Lead Owner** or **Contact Owner** , the record must have been assigned earlier in the router using an **Assign & Update Ownership** node.   
  
If you select **Selected User from Workspace** , no prior assignment is required.

  3. Publish your router. When the router runs, you’ll see the execution result in the router logs:   
  
![05-router-logs-success.png](https://help.chilipiper.com/hc/article_attachments/48644460157971)
  4. In Gong, the Lead or Contact will appear in the selected flow with the configured sender:   
  
![06-gong-contact-in-flow.png](https://help.chilipiper.com/hc/article_attachments/48644502282899)



* * *

## Limitations

  * If the Lead or Contact already exists in the selected Gong Engage Flow, the node will fail.
  * In router logs, this will appear as **Add to Gong Flow – Failed**.



* * *